Packard Bell C3 manual Removing the Hard Disk Drive, Removing the memory module

Page 6

2. Unclip the memory module as shown in Fig. 3

Fig. 3 Removing the memory module

3. Remove the memory module from its slot and put it aside.

Removing the Hard Disk Drive

To remove the hard disk drive, first remove the battery (see Removing the Battery), then perform the following steps:

1. Unscrew the screws as shown in Fig. 4 to remove the HDD cover.

Fig. 4 Removing the hard disk drive cover

2.Release the screws that secure the HDD as shown in Fig. 5, and carefully pull out the HDD assembly.

M3x6 silver

Packard Bell EasyNote C3 Disassembly Manual

6

Image 6
Contents Packard Bell EasyNote C3 Disassembly Manual Table of contents Overview Disassembly InstructionsReassembly Instructions Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Removing the Battery Removing the Memory ModuleRemoving the Hard Disk Drive Removing the memory moduleScrews retaining the HDD assembly Removing the KeyboardDisconnecting the keyboard flat cable Removing the Optical Disk Drive Releasing the optical disk driveRemoving the LCD Module Removing the screws retaining the Heat PlateM2.5x7 silver Removing the LCD Panel Removing the rubber covers & screws on the LCD ModuleRemoving the CPU Removing the LCD Panel hingesUnlocking the CPU Removing the Top Cover Bottom cover screws=M2.5x9 silver =M2.5x7 silver Removing the Touch Pad Removing the Main BoardM2x4 silver Removing the MDC Modem Lifting up carefully the main boardRemoving the Speaker Assembly DIP Switch SettingsDip Switches settings ScrewsEasyNote C3 Disassembly Manual