Packard Bell C3 manual Removing the Optical Disk Drive, Releasing the optical disk drive

Page 9

Removing the Optical Disk Drive

To remove the ODD, first remove the battery (see Removing the Battery) and remove the keyboard (see Removing the Keyboard) then perform the following steps:

1. Remove the screws retaining the optical disk drive as shown in Fig. 9

Fig. 9 Releasing the optical disk drive

2.Flip over the unit, and push the ODD module out from the base unit as shown in Fig. 10

Fig. 10 Pushing the optical drive out

Packard Bell EasyNote C3 Disassembly Manual

M2.5x9 silver

Image 9

Contents Packard Bell EasyNote C3 Disassembly Manual Table of contents Reassembly Instructions Disassembly InstructionsOverview Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Removing the Memory Module Removing the BatteryRemoving the memory module Removing the Hard Disk DriveRemoving the Keyboard Screws retaining the HDD assemblyDisconnecting the keyboard flat cable Releasing the optical disk drive Removing the Optical Disk DriveRemoving the screws retaining the Heat Plate Removing the LCD ModuleM2.5x7 silver Removing the rubber covers & screws on the LCD Module Removing the LCD PanelRemoving the LCD Panel hinges Removing the CPUUnlocking the CPU Bottom cover screws Removing the Top Cover=M2.5x9 silver =M2.5x7 silver Removing the Main Board Removing the Touch PadM2x4 silver Lifting up carefully the main board Removing the MDC ModemDIP Switch Settings Removing the Speaker AssemblyScrews Dip Switches settingsEasyNote C3 Disassembly Manual