NCR 7883 manual Operating the Scanner

NCR RealScan 7883 Installation and Owner Guide

Operating the Scanner

The NCR RealScan 7883 is a fixed position device that is not handled or moved by the operator during operation. It is maintained and serviced by trained service personnel only. The operator has no access to any laser module components.

The RealScan 7883 does not have a power switch. However, you turn it on and off by using the circuit breaker switch, located in the checkstand, that supplies power to the unit. Be sure this switch is in the On position.

The Red Indicator is on when the RealScan 7883 is ready. When the scanner reads a bar code, the Red Indicator turns off and the Green Indicator turns on. Nothing happens if the bar code is not read. The correct way to do pass-by scanning is to just slide the item past the scan window without lifting the item. With presentation scanning, you lift the item, move it straight toward the scan window, then bring the item back away from the scanner.

Motion Detector Red/Green Status Indicator

Item Flow

Horizontal Mount In Counter

Scan Window

Table Top Mount Vertical Mount

11959

30 of 75 04/04 497-0424789 Release F