FieldServer FS-8700-84 instruction manual Table of Contents

FS-8700-84_Lutron_eLumen Manual Table of Contents

TABLE OF CONTENTS

1.	Lutron eLumen Description		1
2.	Driver Scope of Supply		2
	1.01	Supplied by FieldServer Technologies for this driver	2
	1.02	Provided by the Supplier of 3rd Party Equipment	2
	2.1.1.	Required 3rd Party Hardware	2

3. Hardware Connections		3
4. Configuring the FieldServer as a Lutron eLumen Client		5
1.03 Data Arrays/Descriptors		5
1.04 Client Side Connection Descriptions		6
1.05 Client Side Node Descriptors		6
1.06 Client Side Map Descriptors		7
4.1.1.	FieldServer Related Map Descriptor Parameters	8
4.1.2.	Driver Related Map Descriptor Parameters	8
4.1.3.	Timing Parameters	10
4.1.4.	System Monitor Command – Time Now	11
4.1.5.	System Monitor Command – Astro Times	11
4.1.6.	System Monitor Command – Date	12
4.1.7.	System Monitor Command – Code Revision Level	12
4.1.8.	System Monitor Command – Bootcode Revision Level	12
4.1.9.	System Monitor Command – Serial Number	13
4.1.10.	System Monitor Command – Area Status	13
4.1.11.	System Monitor Command – Timeclock Status	14
4.1.12.	System Monitor Command – Zone Intensity	14
4.1.13.	System Monitor Command – Request Panel Emergency Status	15
4.1.14.	System Monitor Command – System Variable Value	15
4.1.15.	System Monitor Command – Wallstation Status	16
4.1.16.	System Monitor Command – Switch Status	16
4.1.17.	System Control Commands containing no Parameters: – Halt Zone	17

4.1.18.System Control Commands containing no Parameters: – Stop Scene

Ramp Up 17

4.1.19.System Control Commands containing no Parameters: – Select System Scene(s) 18

4.1.20.System Control Commands containing no Parameters: – Disable

Timeclock until Enabled 18

4.1.21.System Control Commands containing no Parameters: – Disable timeclock

until end of day or enable issued 18

4.1.22.System Control Commands containing no Parameters: – Re-enable

timeclock with complete catchup 19

4.1.23.System Control Commands containing no Parameters: – Re-enable

timeclock and do previous event 19

4.1.24.System Control Commands containing no Parameters: Standard re-enable

timeclock	19
4.1.25. System Control Commands containing no Parameters: Run script(s)	20

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com