FieldServer FS-8700-84 instruction manual None

FS-8700-84_Lutron_eLumen Driver Manual Page 6 of 36

1.04Client Side Connection Descriptions

Section Title
Connections
Column Title		Function		Legal Values
		Specify which port the		P1-P8, R1-R21
Port		device is connected to the
		FieldServer
Protocol	Specify protocol used		eLumen
Baud*		Specify baud rate		9600 – Vendor limitation
Parity*	Specify parity			None
Data_Bits*		Specify data bits	8
Stop_Bits*		Specify stop bits	1
Handshaking*		Specify hardware		None
		handshaking
Poll _Delay*	Time between internal polls			0-32000 seconds, 1 second

Example

//Client Side Connections

Connections

Port,	Protocol,	Baud,	Parity,	Data Bits,	Stop Bits,	Poll_Delay
P1,	eLumen,	9600,	None,	None,	1,	0.100s

1.05Client Side Node Descriptors

Section Title
Nodes
Column Title		Function		Legal Values
Node_Name		Provide name for node		Up to 32 alphanumeric
				characters
		The eLumen processor
Node_ID		address - only decimal values	0-255
		allowed e.g. 11 hex has to be
		entered as 17.
Protocol	Specify protocol used		eLumen
Port		Specify which port the device is		P1-P8, R1-R21
		connected to the FieldServer
Node_type		Specifies the eLumen		Hex, decimal
		command and data format

1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com