FieldServer FS-8700-84 Section Title, Column Title Function Legal Values, Example

Page 8

FS-8700-84_Lutron_eLumen Driver Manual

Page 5 of 36

4.Configuring the FieldServer as a Lutron eLumen Client

For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” sample files provided with the FieldServer).

This section documents and describes the parameters necessary for configuring the FieldServer to communicate with a Lutron eLumen Server

1.03Data Arrays/Descriptors

The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for Lutron eLumen communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the destination device addresses need to be declared in the “Client Side Nodes” section, and the data required from the Servers needs to be mapped in the “Client Side Map Descriptors” section. Details on how to do this can be found below.

Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.

 

Section Title

 

 

 

 

Data_Arrays

 

 

 

 

Column Title

Function

 

Legal Values

 

Data_Array_Name

Provide name for Data Array

 

Up to 15 alphanumeric

 

 

characters

 

 

 

 

 

 

Provide data format. Each Data

Float, Bit, UInt16,

 

 

SInt16, Packed_Bit,

 

Data_Array_Format

Array can only take on one

 

 

 

Byte, Packed_Byte,

 

 

format.

 

 

 

 

Swapped_Byte

 

 

 

 

 

 

Number of Data Objects. Must

 

 

 

 

be larger than the data storage

 

 

 

Data_Array_Length

area required by the Map

 

1-10,000

 

 

Descriptors for the data being

 

 

 

 

placed in this array.

 

 

 

Example

 

 

 

 

 

 

 

 

 

// Data Arrays

 

 

 

 

Data_Arrays

 

 

 

 

Data_Array_Name,

Data_Format,

Data_Array_Length

 

Area_status,

UInt16,

64

 

 

Zone_list,

UInt16,

64

 

 

Zone_pars,

UInt16,

10

 

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 8
Contents FS-8700-84 Lutron eLumen Effective for all systems manufactured after May 1Table of Contents Appendix a Appendix BLutron eLumen Description Required 3rd Party Hardware Driver Scope of SupplyFieldServer Technologies Description Hardware Connections FS-B2010Lutron Elumen RS-485 Example Section TitleColumn Title Function Legal Values None Link, Area, Linkstation, Switch, Zone, Sysvar, Panel DAAreaNames, DASceneNames, DAZoneNames, xxxOffsetDALutList, DALutListOffset DALutParms, DALutParmsOffsetARS, RDBC, Wrbc Column Title Function Legal Values Column Title Function Timing Parameters Column Title Function Legal ValuesSystem Monitor Command Time Now System Monitor Command Astro TimesSystem Monitor Command Bootcode Revision Level System Monitor Command DateSystem Monitor Command Code Revision Level System Monitor Command Serial Number System Monitor Command Area StatusSystem Monitor Command Timeclock Status System Monitor Command Zone IntensitySystem Monitor Command Request Panel Emergency Status System Monitor Command System Variable ValueSystem Monitor Command Wallstation Status System Monitor Command Switch StatusSystem Control Commands containing no Parameters Halt Zone Client side Map Descriptors MapDescriptorsArea timeclocks to disable Area timeclocks to re-enable System Control Commands containing no Parameters Run scripts Zone Intensity Fade Delay Zone number Area Scene Area tclk Enawallstation Ctrlwslist Link number Areas with scenes to stop ramp down System Control Commands Containing Parameters Toggle zone System Control Commands Containing Parameters Ramp zones up Zones to pommel or pulse Zones to flash System scene numbers System variable numbers NodeName GRAFIKcommand Link Rawswsts00 Passive Active read on startup Retrieving names Getnames AreaNames 511FS-8700-84LutroneLumen Driver ManualPage 35 Appendix B. Revision History Date Resp Format Driver Comment Ver Rev