FieldServer FS-8700-84 instruction manual Link number

Page 28

FS-8700-84_Lutron_eLumen Driver Manual

Page 25 of 36

4.1.33.System Control Commands containing no Parameters: Simulate wallstation(s) switch press

//Client side Map Descriptors

Map_Descriptors
Map_Descriptor_Name,	Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	DA_Lut_List,	DA_Lut_List_Offset,	Length
Ws_sw_press,	Lut_triggers,	16,	awt,	LUT_GRF6_0,	sim_ws_sw_press,	Sim_sw_list,	0,	1

DA_Lut_List data setup
Position from DA_Lut_List_Offset	Description
0	Link number ( 0-11 )
1	Station of link ( 0-31 ) of Switch ID 0
2	Switch on station ( 0-31 ) of Switch ID 0
3	Station of link ( 0-31 ) of Switch ID 1
4	Switch on station ( 0-31 ) of Switch ID 1
..	..
63	Station of link ( 0-31 ) of Switch ID 31
64	Switch on station ( 0-31 ) of Switch ID 31

Note: 1 to 32 switch ids may be used in a single command. To trigger the command, write the number of switch IDs into the Data Array specified by Data_Array_Name at Data_Array_Offset.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 28

Contents FS-8700-84 Lutron eLumen Effective for all systems manufactured after May 1Table of Contents Appendix a Appendix BLutron eLumen Description FieldServer Technologies Description Driver Scope of SupplyRequired 3rd Party Hardware Hardware Connections FS-B2010Lutron Elumen RS-485 Column Title Function Legal Values Section TitleExample None Link, Area, Linkstation, Switch, Zone, Sysvar, Panel DAAreaNames, DASceneNames, DAZoneNames, xxxOffsetDALutList, DALutListOffset DALutParms, DALutParmsOffsetARS, RDBC, Wrbc Column Title Function Legal Values Column Title Function Timing Parameters Column Title Function Legal ValuesSystem Monitor Command Time Now System Monitor Command Astro TimesSystem Monitor Command Code Revision Level System Monitor Command DateSystem Monitor Command Bootcode Revision Level System Monitor Command Serial Number System Monitor Command Area StatusSystem Monitor Command Timeclock Status System Monitor Command Zone IntensitySystem Monitor Command Request Panel Emergency Status System Monitor Command System Variable ValueSystem Monitor Command Wallstation Status System Monitor Command Switch StatusSystem Control Commands containing no Parameters Halt Zone Client side Map Descriptors MapDescriptorsArea timeclocks to disable Area timeclocks to re-enable System Control Commands containing no Parameters Run scripts Zone Intensity Fade Delay Zone number Area Scene Area tclk Enawallstation Ctrlwslist Link number Areas with scenes to stop ramp down System Control Commands Containing Parameters Toggle zone System Control Commands Containing Parameters Ramp zones up Zones to pommel or pulse Zones to flash System scene numbers System variable numbers NodeName GRAFIKcommand Link Rawswsts00 Passive Active read on startup Retrieving names Getnames AreaNames 511FS-8700-84LutroneLumen Driver ManualPage 35 Appendix B. Revision History Date Resp Format Driver Comment Ver Rev