FieldServer FS-8700-84 instruction manual Hardware Connections, FS-B2010

Page 6

FS-8700-84_Lutron_eLumen Driver Manual

Page 3 of 36

3.Hardware Connections

The FieldServer is connected to the Lutron eLumen as shown in connection drawing.

Configure the eLumen according to manufacturer’s instructions

FS-8917-02

FS-8917-02

CAT 5 CABLE

FS-8915-10

Serial					Power OK
Tx	Rx	Tx	Rx		- +
EIA232		Ethernet		USB	EIA485

FS-B2010

LUTRON SERIAL

RS-232 INTERFACE

PART # 470-784

8917-02 WIRE LIST

FUNCTION	FROM	TO	COLOUR
RX	RJ45-01	DB9M-02	WHITE
CTS	RJ45-02	DB9M-08	BROWN
DSR	RJ45-03	DB9M-06	YELLOW
GND	RJ45-04	DB9M-05	GREEN
GND	RJ45-05		RED
DTR	RJ45-06	DB9M-04	BLACK
RTS	RJ45-07	DB9M-07	ORANGE
TX	RJ45-08	DB9M-03	BLUE

(408)-262-2299

LUTRON ELUMEN RS-232

CONNECTION DIAGRAM

BASE NAME:		DATE: 11/12/04
FILE NAME: FS-T28700-84 .VSD		BY: MC

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 6

Contents FS-8700-84 Lutron eLumen Effective for all systems manufactured after May 1Table of Contents Appendix a Appendix BLutron eLumen Description Driver Scope of Supply FieldServer Technologies DescriptionRequired 3rd Party Hardware Hardware Connections FS-B2010Lutron Elumen RS-485 Section Title Column Title Function Legal ValuesExample None DALutList, DALutListOffset Link, Area, Linkstation, Switch, Zone, Sysvar, PanelDAAreaNames, DASceneNames, DAZoneNames, xxxOffset DALutParms, DALutParmsOffsetARS, RDBC, Wrbc Column Title Function Legal Values Column Title Function Timing Parameters Column Title Function Legal ValuesSystem Monitor Command Time Now System Monitor Command Astro TimesSystem Monitor Command Date System Monitor Command Code Revision LevelSystem Monitor Command Bootcode Revision Level System Monitor Command Serial Number System Monitor Command Area StatusSystem Monitor Command Timeclock Status System Monitor Command Zone IntensitySystem Monitor Command Request Panel Emergency Status System Monitor Command System Variable ValueSystem Monitor Command Wallstation Status System Monitor Command Switch StatusSystem Control Commands containing no Parameters Halt Zone Client side Map Descriptors MapDescriptorsArea timeclocks to disable Area timeclocks to re-enable System Control Commands containing no Parameters Run scripts Zone Intensity Fade Delay Zone number Area Scene Area tclk Enawallstation Ctrlwslist Link number Areas with scenes to stop ramp down System Control Commands Containing Parameters Toggle zone System Control Commands Containing Parameters Ramp zones up Zones to pommel or pulse Zones to flash System scene numbers System variable numbers NodeName GRAFIKcommand Link Rawswsts00 Passive Active read on startup Retrieving names Getnames AreaNames 511FS-8700-84LutroneLumen Driver ManualPage 35 Appendix B. Revision History Date Resp Format Driver Comment Ver Rev