FieldServer FS-8700-84 System Monitor Command Time Now, System Monitor Command Astro Times

Page 14

FS-8700-84_Lutron_eLumen Driver Manual

Page 11 of 36

4.1.4.System Monitor Command – Time Now

//Client side Map Descriptors

Map_Descriptors Map_Descriptor_Name, Scan_Interval,

Time_now,5s,

Data_Array_Name, Data_Array_Offset,

Function,

Node_Name,

GRAFIK_command,

Length

Time_now,

0,

rdbc,

LUT_GRF6_0,

time_now,

1

Data storage in Data Array

Position from offset

Description:

0

Minutes from midnight

4.1.5.System Monitor Command – Astro Times

//Client side Map Descriptors

Map_Descriptors

 

 

 

 

 

 

 

Map_Descriptor_Name, Scan_Interval, Data_Array_Name, Data_Array_Offset,

Function,

Node_Name,

GRAFIK_command,

Length

Astro_times,

5s,

Astro_times,

0,

rdbc,

LUT_GRF6_0,

astro_times,

2

Data storage in Data Array

 

Position from offset

Description:

0

Sunrise minutes from midnight

1

Sunset minutes from midnight

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 14
Contents FS-8700-84 Lutron eLumen Effective for all systems manufactured after May 1Table of Contents Appendix a Appendix BLutron eLumen Description Required 3rd Party Hardware Driver Scope of SupplyFieldServer Technologies Description Hardware Connections FS-B2010Lutron Elumen RS-485 Example Section TitleColumn Title Function Legal Values None DALutList, DALutListOffset Link, Area, Linkstation, Switch, Zone, Sysvar, PanelDAAreaNames, DASceneNames, DAZoneNames, xxxOffset DALutParms, DALutParmsOffset ARS, RDBC, Wrbc Column Title Function Legal Values Column Title Function Timing Parameters Column Title Function Legal ValuesSystem Monitor Command Time Now System Monitor Command Astro TimesSystem Monitor Command Bootcode Revision Level System Monitor Command DateSystem Monitor Command Code Revision Level System Monitor Command Serial Number System Monitor Command Area StatusSystem Monitor Command Timeclock Status System Monitor Command Zone IntensitySystem Monitor Command Request Panel Emergency Status System Monitor Command System Variable ValueSystem Monitor Command Wallstation Status System Monitor Command Switch StatusSystem Control Commands containing no Parameters Halt Zone Client side Map Descriptors MapDescriptorsArea timeclocks to disable Area timeclocks to re-enable System Control Commands containing no Parameters Run scripts Zone Intensity Fade Delay Zone number Area Scene Area tclk Enawallstation Ctrlwslist Link number Areas with scenes to stop ramp down System Control Commands Containing Parameters Toggle zone System Control Commands Containing Parameters Ramp zones up Zones to pommel or pulse Zones to flash System scene numbers System variable numbers NodeName GRAFIKcommand Link Rawswsts00 Passive Active read on startup Retrieving names Getnames AreaNames 511FS-8700-84LutroneLumen Driver ManualPage 35 Appendix B. Revision History Date Resp Format Driver Comment Ver Rev