FieldServer FS-8700-84 instruction manual Zones to flash

Page 33

FS-8700-84_Lutron_eLumen Driver Manual

Page 30 of 36

4.1.41.System Control Commands Containing Parameters: Flash zones aka “Multi level ( Flash or Warn or Chase )“

// Client side Map Descriptors Map_Descriptors

Map_Descriptor_Name,	Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	DA_Lut_List,	DA_Lut_List_Offset,	DA_Lut_Parms,	DA_Lut_Parms_Offset,	Length
Flash_zone,	Lut_triggers,	24,	awt,	LUT_GRF6_0,	flash_zone,	Zone_list,	0,	Zone_pars,	0,	1
DA_Lut_List setup
Position from DA_Lut_List_Offset			Description
0-63			Zone(s) to flash
DA_Lut_Parms setup
Position from DA_Lut_Parms_Offset			Description
0			Delay1 cycles
1			Intensity1 ( 0-127 )
2			Fade1 cycles
3			Delay2 cycles
4			Intensity2 ( 0-127 )
5			Fade2 cycles
6			Delay2 cycles
7			Repeat ( 0-255 )

4.1.42.System Control Commands Containing Parameters: Ramp scene zones up

// Client side Map Descriptors Map_Descriptors

Map_Descriptor_Name,

Data_Array_Name,

Data_Array_Offset,

Function,

Node_Name,

GRAFIK_command,

DA_Lut_List,

DA_Lut_List_Offset,

DA_Lut_Parms,

DA_Lut_Parms_Offset,

Length

Rmp_scn_zns_up,

Lut_triggers,

25,

awt,

LUT_GRF6_0,

ramp_scene_zones_up,

Area_list,

0,

Area_pars,

0,

1

DA_Lut_List setup

Position from DA_Lut_List_Offset

Description

0-31

System area numbers

DA_Lut_Parms setup

Position from DA_Lut_Parms_Offset

Description

0

Unaffected intensity ( 0-128 )

1

Initial rate step size

2

Repeat rate step size

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 33

Contents Effective for all systems manufactured after May 1 FS-8700-84 Lutron eLumenTable of Contents Appendix B Appendix aLutron eLumen Description Driver Scope of Supply FieldServer Technologies DescriptionRequired 3rd Party Hardware FS-B2010 Hardware ConnectionsLutron Elumen RS-485 Section Title Column Title Function Legal ValuesExample None DAAreaNames, DASceneNames, DAZoneNames, xxxOffset Link, Area, Linkstation, Switch, Zone, Sysvar, PanelDALutList, DALutListOffset DALutParms, DALutParmsOffsetARS, RDBC, Wrbc Column Title Function Legal Values Timing Parameters Column Title Function Legal Values Column Title FunctionSystem Monitor Command Astro Times System Monitor Command Time NowSystem Monitor Command Date System Monitor Command Code Revision LevelSystem Monitor Command Bootcode Revision Level System Monitor Command Area Status System Monitor Command Serial NumberSystem Monitor Command Zone Intensity System Monitor Command Timeclock StatusSystem Monitor Command System Variable Value System Monitor Command Request Panel Emergency StatusSystem Monitor Command Switch Status System Monitor Command Wallstation StatusClient side Map Descriptors MapDescriptors System Control Commands containing no Parameters Halt ZoneArea timeclocks to disable Area timeclocks to re-enable System Control Commands containing no Parameters Run scripts Zone Intensity Fade Delay Zone number Area Scene Area tclk Enawallstation Ctrlwslist Link number Areas with scenes to stop ramp down System Control Commands Containing Parameters Toggle zone System Control Commands Containing Parameters Ramp zones up Zones to pommel or pulse Zones to flash System scene numbers System variable numbers NodeName GRAFIKcommand Link Rawswsts00 Passive Getnames AreaNames 511 Active read on startup Retrieving namesFS-8700-84LutroneLumen Driver ManualPage 35 Comment Ver Rev Appendix B. Revision History Date Resp Format Driver