FieldServer FS-8700-84 System Control Commands containing no Parameters Run scripts

Page 23

FS-8700-84_Lutron_eLumen Driver Manual

Page 20 of 36

4.1.25.System Control Commands containing no Parameters: Run script(s)

// Client side Map Descriptors Map_Descriptors

Map_Descriptor_Name,

Data_Array_Name,

Data_Array_Offset,

Function,

Node_Name,

GRAFIK_command,

DA_Lut_List,

DA_Lut_List_Offset,

Length

Run_script,

Lut_triggers,

8,

awt,

LUT_GRF6_0,

run_script,

Script_list,

0,

1

DA_Lut_List data setup

 

 

 

 

 

 

 

Position from DA_Lut_List_Offset

Description

 

 

 

 

 

 

0-63

 

Numbers of scripts to run

 

 

 

 

4.1.26.System Control Commands containing no Parameters: Toggle system variable value

//Client side Map Descriptors

Map_Descriptors

Map_Descriptor_Name,

Data_Array_Name,

Data_Array_Offset,

Function,

Node_Name,

GRAFIK_command,

DA_Lut_List,

DA_Lut_List_Offset,

Length

Toggle_sys_var,

Lut_triggers,

9,

awt,

LUT_GRF6_0,

toggle_sys_var_val,

Var_list,

0,

1

DA_Lut_List data setup

 

 

 

 

 

 

 

Position from DA_Lut_List_Offset

Description

 

 

 

 

 

 

0-31

 

Numbers of system variables to toggle

 

 

 

 

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com

Image 23
Contents Effective for all systems manufactured after May 1 FS-8700-84 Lutron eLumenTable of Contents Appendix B Appendix aLutron eLumen Description Required 3rd Party Hardware Driver Scope of SupplyFieldServer Technologies Description FS-B2010 Hardware ConnectionsLutron Elumen RS-485 Example Section TitleColumn Title Function Legal Values None DALutParms, DALutParmsOffset Link, Area, Linkstation, Switch, Zone, Sysvar, PanelDAAreaNames, DASceneNames, DAZoneNames, xxxOffset DALutList, DALutListOffsetARS, RDBC, Wrbc Column Title Function Legal Values Timing Parameters Column Title Function Legal Values Column Title FunctionSystem Monitor Command Astro Times System Monitor Command Time NowSystem Monitor Command Bootcode Revision Level System Monitor Command DateSystem Monitor Command Code Revision Level System Monitor Command Area Status System Monitor Command Serial NumberSystem Monitor Command Zone Intensity System Monitor Command Timeclock StatusSystem Monitor Command System Variable Value System Monitor Command Request Panel Emergency StatusSystem Monitor Command Switch Status System Monitor Command Wallstation StatusClient side Map Descriptors MapDescriptors System Control Commands containing no Parameters Halt ZoneArea timeclocks to disable Area timeclocks to re-enable System Control Commands containing no Parameters Run scripts Zone Intensity Fade Delay Zone number Area Scene Area tclk Enawallstation Ctrlwslist Link number Areas with scenes to stop ramp down System Control Commands Containing Parameters Toggle zone System Control Commands Containing Parameters Ramp zones up Zones to pommel or pulse Zones to flash System scene numbers System variable numbers NodeName GRAFIKcommand Link Rawswsts00 Passive Getnames AreaNames 511 Active read on startup Retrieving namesFS-8700-84LutroneLumen Driver ManualPage 35 Comment Ver Rev Appendix B. Revision History Date Resp Format Driver