FieldServer FS-8700-84 instruction manual System scene numbers

FS-8700-84_Lutron_eLumen Driver Manual Page 31 of 36

4.1.43.System Control Commands Containing Parameters: Ramp scene zones down

// Client side Map Descriptors Map_Descriptors

Map_Descriptor_Name,	Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	DA_Lut_List,	DA_Lut_List_Offset,	DA_Lut_Parms,	DA_Lut_Parms_Offset,	Length
Rmp_scn_zns_dn,	Lut_triggers,	26,	awt,	LUT_GRF6_0,	ramp_scene_zones_dn,	Area_list,	0,	Area_pars,	0,	1
DA_Lut_List setup
Position from DA_Lut_List_Offset			Description
0-31			System area numbers
DA_Lut_Parms setup
Position from DA_Lut_Parms_Offset			Description
0			Unaffected intensity ( 0-128 )
1			Initial rate step size
2			Repeat rate step size

4.1.44.System Control Commands Containing Parameters: Select system scene(s) using override

times

// Client side Map Descriptors Map_Descriptors

Map_Descriptor_Name,	Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	DA_Lut_List,	DA_Lut_List_Offset,	DA_Lut_Parms,	DA_Lut_Parms_Offset,	Length
Sel_scene_oride,	Lut_triggers,	27,	awt,	LUT_GRF6_0,	sel_scene_override,	Scene_list,	0,	Scene_pars,	0,	1
DA_Lut_List setup
Position from DA_Lut_List_Offset			Description
0-63			System scene numbers
DA_Lut_Parms setup
Position from DA_Lut_Parms_Offset			Description
0			Fade cycles
1			Delay cycles

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com