FieldServer FS-8700-84 instruction manual System Monitor Command Timeclock Status

FS-8700-84_Lutron_eLumen Driver Manual Page 14 of 36

4.1.11.System Monitor Command – Timeclock Status

//Client side Map Descriptors

Map_Descriptors
Map_Descriptor_Name,	Scan_Interval,		Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK	_command,	Area,	Length
Tclk_sts_00,	1s,		Tclk_status,	0,	rdbc,	LUT_GRF6_0,	timeclock_status,		0,	4
Tclk_sts_01,	1s,		Tclk_status,	4,	rdbc,	LUT_GRF6_0,	timeclock_status,		1,	4
Data storage in Data Array
Position from offset		Description
0		Schedule number
1		Next event type (1 = no more events, 2 = timeclock disabled, 3 = astronomic event, 4 = realtime event )
2		Next event time ( minutes past midnight )
3		Next script

Note: This command stores 4 data values. To prevent overlaps, remember to increment Data_Array_Offset by 4 when referencing the same Data Array with other Map Descriptors.

4.1.12.System Monitor Command – Zone Intensity

//Client side Map Descriptors

Map_Descriptors

Map_Descriptor_Name,	Scan_Interval,		Data_Array_Name,	Data_Array_Offset,	Function,	Node_Name,	GRAFIK_command,	Zone,	Length
Zn_int_00,	1s,		Zone_int,	0,	rdbc,	LUT_GRF6_0,	zone_intensity,	0,	1
Zn_int_01,	1s,		Zone_int,	1,	rdbc,	LUT_GRF6_0,	zone_intensity,	1,	1
Data storage in Data Array
Position from offset		Description
0		Zone intensity ( 0-127 )

Note: This command stores 1 data value. To prevent overlaps, remember to increment Data_Array_Offset by 1 when referencing the same Data Array with other Map Descriptors.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com