Page 17 of 36 |
4.1.17.System Control Commands containing no Parameters: – Halt Zone
//Client side Map Descriptors
Map_Descriptors |
|
|
|
|
|
|
|
|
Map_Descriptor_Name, | Data_Array_Name, Data_Array_Offset, | Function, | Node_Name, | GRAFIK_command, | DA_Lut_List, | DA_Lut_List_Offset, | Length | |
Zone_halt, | Lut_triggers, | 0, | awt, | LUT_GRF6_0, | halt_zone, | Zone_list, | 0, | 1 |
DA_Lut_List data setup |
|
Position from DA_Lut_List_Offset | Description |
Zone(s) to halt |
Note: After setting up the zone numbers to halt in the DA_Lut_List Data Array, trigger this command by writing the number of zones to halt into the Data Array specified by Data_Array_Name at an offset specified by Data_Array_Offset.
4.1.18.System Control Commands containing no Parameters: – Stop Scene Ramp Up
// Client side Map Descriptors Map_Descriptors
Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_Name, | GRAFIK_command, | DA_Lut_List, | DA_Lut_List_Offset, | Length |
Stop_scn_rmp_up, | Lut_triggers, | 1, | awt, | LUT_GRF6_0, | stop_scene_ramp_up, | Area_list, | 0, | 1 |
DA_Lut_List data setup |
|
|
|
|
|
|
| |
Position from DA_Lut_List_Offset | Description |
|
|
|
|
|
| |
| Area(s) with scenes to stop ramp up |
|
|
|
| |||
Note: After setting up the area numbers to stop scene ramps in the DA_Lut_List Data Array, trigger this command by writing the number of areas into the Data Array specified by Data_Array_Name at an offset specified by Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408)