Lantronix MSS manual Rf command

Command Reference			Disk
		Rm
		Removes files and/or directories from the MSS RAM and Flash disks. The
		possible flags are:
	-i	Prompts for a Y (yes) or N (no) before the file is removed.
	-r	Removes an entire directory and all of its subdirectories.
		Rmdir
		Removes a directory from the specified disks. The command can only be used
		if the directory is empty. If the directory is full, you must add the DISK RM -
		rf command.
		Sync
		Forces the MSS to write files to flash immediately. Normally, when the MSS
		is rewriting files to the Flash disk, it will buffer data before initiating a write
		sequence. Write sequences are automatically written after 5 seconds of disk
		inactivity.
		Tail
		Outputs the end of a file.
		Test
		Evaluates a file (true or false). The possible flags that will be returned are:
	-d	True if file exists and is a directory.
	-e	True if file exists (regardless of type).
	-f	True if file exists and is a regular file.
	-l	True if file exists and is a symbolic link.
	-r	True if file exists and is readable.
	-w	True if file exists and is writable. True indicates only that
		the write flag is on. The file is not writable on a read-only
		file system even if this test indicates true.
	-x	True if file exists and is executable. True indicates only
		that the execute flag is on. If the file is a directory, true
		indicates that the file can be searched.
		Touch
		Creates an empty disk file.
Examples		Local>> DISK CHMOD 755 /PCCARD1/index.txt
		Local>> DISK FORMAT /PCCARD1
		Local>> DISK LS -l /PCCARD1/
		Local>> DISK TEST /PCCARD1/add.exe

2-56