Lantronix MSS manual Change 80211 Fragmentation, Change 80211 MAC Address, Errors, Parameters

Command Reference	Change 80211
Errors	If you enter a command that is not applicable to the 802.11 card currently in
	use, you will receive an Error message.
Parameters	name
	Enter a string of up to 32 characters. If the string contains lowercase letters or
	non-alphanumerics, it may need to be enclosed in double-quotes to be
	processed properly.
	None
	If no ESSID string is set, the MSS will communicate with whichever Access
	Point (AP) gives the strongest signal, regardless of ESS association. Setting the
	ESSID to none allows the MSS to associate with any AP within range.
Defaults	ESSID=None
See Also	Show 80211, page 2-63

2.2.5 Change 80211 Fragmentation

CHANGE 80211 FRAGMENTATION num

Changes the fragmentation threshold.

Any configuration changes you make will not take place until you issue the Change 80211 Reset command.

Restrictions	Requires privileged user status.
	Only applies to the MSS-VIA and certain MSS4 models.
Errors	If you enter a command that is not applicable to the 802.11 card currently in
	use, you will receive an Error message.
Parameters	num
	Enter an integer between 256 and 2346 to change the fragmentation threshold.
Defaults	2346
See Also	Show 80211, page 2-63

2.2.6 Change 80211 MAC Address

 CARD 

CHANGE 80211 MACADDRESS    MSS 

Configures which of the two available MAC addresses the MSS will use on the network—its own or that of the attached 802.11 wireless networking PC card. The MSS MAC address, which is the same as its hardware address, is printed on bottom label of the MSS.

Any configuration changes you make will not take place until you issue the Change 80211 Reset command.

2-5