Lantronix MSS manual Show Snmp, Show Users, Show Version, Source

Command Reference Show SNMP

2.96 Show SNMP

SHOW SNMP

Displays configured SNMP communities and their access modes (read-only or read/write). The default community name is public, and allows read-only access. There is one additional user-configurable SNMP community.

See Also Status Displays, page 5-6; Change SNMPSetComm, page 2-44.

2.97 Show Users

SHOW USERS

Displays the current users logged into the MSS, their port usernames, and current connection information.

See Also The Status Displays section in your MSS Installation Guide.

2.98 Show Version

SHOW VERSION

Displays operating software version information.

Errors	Applies to the MSS4 only.
See Also	Change Software, page 2-45

2.99 Source

SOURCE hostname:filename

Downloads a configuration file from a TFTP host. The file is assumed to contain lines of server commands to be executed. The Source command is most useful for trying out a configuration file before using the Change Software command.

Errors Only applies to the MSS-VIA and MSS4.

Parametershostname:filename

Enter the TFTP hostname (either a text name or an IP address) followed by a colon and the download path and file name.

2-67