Lantronix MSS manual Change LAT Groups, Change LAT Identification, Change Loadhost

Command Reference				Change LAT Groups
2.27 Change LAT Groups
		ALL	
			
	CHANGE LAT GROUPS 	groupList 
			
		NONE 

Specifies the LAT service groups to which the MSS can connect. Groups are numbered from 0 to 255.

Restrictions	Requires privileged user status.
Errors	The MSSLite, MSS4, and the MSS-VIA do not support LAT.
Parameters	groupList
	Specify a list of groups to replace the current list. Use commas to separate
	group numbers, and use hyphens to separate ranges.
Defaults	0 (group zero)
Examples	CHANGE LAT GROUPS 17,21-28,118-211,220

2.28 Change LAT Identification

CHANGE LAT IDENTIFICATION identString

Sets the text string that identifies the MSS on LAT networks.

Restrictions	Requires privileged user status.
Errors	The MSSLite, MSS4, and the MSS-VIA do not support LAT.
Parameters	identString
	Enter a string of 40 or fewer characters. Enclose the string in quotes if it
	contains lower-case letters, spaces, or punctuation.

2.29 Change Loadhost

CHANGE SERVER SECONDARY LOADHOST IPaddress

Specifies the TCP/IP host from which the MSS requests its runtime code.

Restrictions Requires privileged user status.

ParametersServer

MSS4 only.

2-29