Lantronix MSS manual Change 80211 Reset, Change 80211 RTS

Command Reference	Change 80211
Parameters	Regions
	IC: Canada
	ETSI: Europe, most countries (verify with your local regulatory body)
	SPAIN: Spain
	FRANCE: France
	MKK: Japan
Defaults	FCC
Examples	Local>> CHANGE 80211 REGION FRANCE
	Local>> CHANGE 80211 RESET
See Also	Show 80211, page 2-63

2.2.10 Change 80211 Reset

CHANGE 80211 RESET

Resets the MSS so any configuration changes will take effect immediately.

Restrictions	Requires privileged user status.
	Only applies to the MSS-VIA and certain MSS4 models.
Parameters	Reset
	Resets the MSS to make all 802.11 changes take effect immediately. This
	command should be entered anytime you make an 802.11 configuration
	change. It also clears out any previous errors and starts over with the current
	802.11 parameters.
See Also	Show 80211, page 2-63

2.2.11 Change 80211 RTS

CHANGE 80211 RTS num

Changes the RTS threshold value.

Any configuration changes you make will not take place until you issue the Change 80211 Reset command.

Restrictions	Requires privileged user status.
	Only applies to the MSS-VIA and certain MSS4 models.
Errors	If you enter a command that is not applicable to the 802.11 card currently in
	use, you will receive an Error message.

2-8