Command Reference | Change Privpass |
servicename
Enter the name of the desired LAT service.
envString
Add the desired environment key(s). See Appendix B for a complete list of strings. Options must be separated by colons.
None
Clears preferred service configurations.
See Also | Change Dedicated, page |
2.47 Change Privpass
CHANGE SERVER PRIVPASS passwd
Sets the password to become the privileged user. The password should consist of no more than 6 alphabetic letters.
If you do not enter the password at the command line, you will immediately be prompted to enter the new password. This password is not displayed when typed.
Restrictions | Requires privileged user status. |
Parameters | Server |
| MSS4 only. |
| passwd |
| Enter a password of up to 6 alphabetic characters. When entered as part of the |
| command, the password should be enclosed in quotation marks. |
Defaults | system |
Examples | CHANGE PRIVPASS “walrus” |
See Also | Set Privileged, page |
2.48 Change RARP
DISABLED
CHANGE SERVER RARP ENABLED
Controls whether the MSS will query for a RARP host at system boot time.
Restrictions | Requires privileged user status. |
ParametersServer
MSS4 only.
