Lantronix MSS manual Change Modem Emulation, Change Name

Command Reference Change Modem Emulation

PortList

Specify a particular port or group of ports. Port numbers are specified with integers between 1 and 4, and should be separated with commas (for lists) or dashes (for ranges).

DefaultsDisabled

See Also Change Autostart, page 2-12;Change DSRLogout, page 2-22.

2.33 Change Modem Emulation

 DISABLED 

CHANGE PORT PortList MODEM EMULATION   ENABLED 

Presents a modem interface to an attached serial device. The MSS can then accept AT-style modem commands and handle the modem signals correctly. See your Installation Guide for more details on modem emulation.

Note:	If the MSS is in modem emulation mode and a serial port is idle, the MSS can still
	accept network TCP connections to that serial port.
Restrictions	Requires privileged user status.
	Does not apply to the MSS485.

Parameters

Note:

Port

MSS4 only. Specifies a particular port or group of ports.

In the absence of the PortList parameter, the configuration will affect the MSS4’s current port only.

PortList

	Specify a particular port or group of ports. Port numbers are specified with
	integers between 1 and 4, and should be separated with commas (for lists) or
	dashes (for ranges).
Defaults	Disabled
See Also	Change Autostart, page 2-12; the Using the MSS chapter of your Installation
	Guide

2.34 Change Name

CHANGE SERVER NAME serverName

Renames the MSS. The unit’s default name, which is based on its default Ethernet address, is printed on its underside. This name is what will be advertised if WINS is enabled.

Restrictions Requires privileged user status.

2-32