Lantronix MSS manual Change Incoming, Examples

Command ReferenceChange Incoming

Parameters	Server
	MSS4 only.
	period
	Enter a length of time in minutes (1 to 120) or seconds (5 to 60). For minutes,
	add an m after the number. For seconds, add an s after the number.
Defaults	30 minutes
Examples	Local> CHANGE INACTIVE TIMER 10m
See Also	Change Inactive Logout, page 2-25.

2.23 Change Incoming

			TELNET
		
			LAT
			BOTH
CHANGE	SERVER	
		INCOMING 	NONE
		
			PASSWORD
		
			NOPASSWORD
		























Permits or denies incoming Telnet, Rlogin, and LAT connections and enforces password protection. The Show Server command shows the status of incoming connection parameters.

Restrictions	Requires privileged user status.
	The MSSLite, MSS-VIA, and the MSS4 do not support LAT or the Both
	parameter.
Parameters	Server
	MSS4 only.
	Telnet
	Enables incoming Telnet connections.
	LAT
	Enables incoming LAT connections.
	Both
	Enables incoming Telnet and incoming LAT connections. Only valid on
	models with LAT support.
	None
	Disables all incoming connections.

2-26