Lantronix MSS manual Initialize, Show Hostlist command

Command Reference	Initialize
	servicename
	Enter the name of the desired LAT service.
	Rlogin
	Adds an Rlogin entry to the host table.
	hostname
	Enter the IP address of the target host. For UDP only, resolvable hostnames
	and broadcast/multicast IP addresses can be used.
	SPX
	Adds an SPX entry to the host table.
	SAPname
	Enter the SPX host’s SAP name.
	TCP
	Adds a TCP entry to the host table. By default, TCP opens a regular Telnet
	connection that includes Telnet IAC option negotiation.
	UDP
	Adds a UDP entry to the host table.
	envString
	Add the desired environment key(s). See Appendix B for a complete list of
	strings. Options must be separated by colons.
	Delete
	Removes one or all entries from the hostlist.
	number
	Specify which entry to remove. To view configured host entries, enter the
	Show Hostlist command.
See Also	Change Dedicated, page 2-19; Crypt Password, page 2-52; Show Hostlist,
	page 2-64

2.77 Initialize

		
	DELAY num 
	FACTORY	
INITIALIZE 		
	NOBOOT	
	RELOAD	
		

Reboots the MSS.
Restrictions	Requires privileged user status.
Errors	When Reload or Factory initialization takes place, all user-entered commands
	are lost; the MSS must be reconfigured.

2-59