Lantronix MSS manual Unassigned

Show 802.11 Errors	Rightmost Number
00100000	Unassigned.
00080000	Unassigned.
00040000	Unassigned.
00020000	Internal error. May occur on some cards in conjunction with other described
	error codes.
00010000	The 802.11 card in use is not compatible with the regulatory region to which
	the unit has been programmed.
00008000	Internal error.
00004000	Internal error. May occur on some cards in conjunction with authentication or
	association failures, or other configuration mismatches.
00002000	Received an 802.11 packet that was too large to be handled.
00001000	Internal error.
00000800	Failed to queue a data packet that could not be sent immediately for later
	transmission. It was dropped.
00000400	Internal error.
00000200	Failed to find, sync to, and associate with an AP or ad-hoc network within a
	reasonable time. Most likely there is no AP or ad-hoc network within range
	that satisfies the unit's ESSID, NETWORK-TYPE, and CHANNEL
	parameters.
00000100	Received an 802.11 data packet that was not encapsulated as per RFC1042 or
	802.1h. Unit will still decapsulate and interpret the packet. Some vendors'
	APs trip this error when they send out "magic packets" containing proprietary
	extensions not defined by the 802.11 spec.
00000080	Received an 802.11 data packet encapsulated in a completely foreign manner,
	or not encapsulated at all. Unit will still attempt to interpret the packet, but
	proper interpretation is not guaranteed. The packet may be dropped as
	unintelligible.
00000040	Received an encrypted packet that could not properly be decrypted. Packet
	was dropped.
00000020	Unspecified error during packet reception. At least one packet was dropped.
	Absence of this error bit does not imply that all packets have been received
	correctly, however.
00000010	A received packet failed CRC check and was dropped.
00000008	Internal error. May occur in conjunction with "no AP or ad-hoc network
	within range" errors.

B-4