Lantronix MSS manual 100 SPX, Telnet, ParametersSAPname

Command Reference	SPX
Examples	Local> SOURCE “labsun:start.com”
See Also	Change Startup File, page 2-46

2.100 SPX

SPX SAPname

Attempts a connection to an SPX-enabled device on the network. SPX devices announce their availability to the network with SAP names; the target device must be advertising itself via SAP announcements for the MSS to make a connection.

Errors Does not apply to the MSSLite, MSS-VIA and MSS4.

ParametersSAPname

Enter the target device’s SAP name, for example, MSS_xxxxxx.

2.101 Telnet

TELNET IPaddress

:envstring

Initiates a Telnet connection to a remote host. An environment string can also be specified as described below. If you have previously configured a preferred host, you can enter the command without a parameter to automatically connect to the preferred host.

Errors	There can be no space between the hostname and the colon (:), or between the
	colon and the environment string.
Parameters	IPaddress
	Enter a text host name or an IP address. This parameter is only optional if a
	preferred service has been defined.
	envString
	Add the desired environment key(s). See Appendix B for a complete list of
	strings. Options must be separated by colons.
Examples	Local> Telnet 192.0.1.201:T
	(Forms a raw TCP connection to the specified host)
	Local> Telnet phred:7000
	(Connects to the remote console port on host phred)
See Also	Change Dedicated, page 2-19;Status Displays, page 5-6.

2-68