Command Reference | Change IPAddress |
| Password |
| Prompts the user to enter the login password when attempting an incoming |
| connection. |
| Nopassword |
| Allows incoming connections without prompting for the login password. |
Defaults | Telnet, Nopassword |
See Also | Change Loginpass, page |
2.24 Change IPAddress
CHANGE SERVER IPADDRESS IPaddress
Sets the MSS’s IP address. The IP address must be set before any TCP/IP functionality is available. The new IP address will take effect immediately.
Restrictions | Requires privileged user status. |
Errors | You will receive an error if the MSS cannot use the specified IP address or if |
| there are currently any network connections. |
Parameters | Server |
| MSS4 only. |
| IPaddress |
| Specify the IP address in standard numeric format. |
See Also | Change DHCP, page |
| Guide. |
2.25 Change IPSecurity
|
| BOTH |
|
| |
|
|
| |||
|
| | ENABLED | | |
|
| INCOMING | | | |
CHANGE IPSECURITY IPaddress |
| | |||
| | DISABLED | |||
|
| OUTGOING |
|
| |
|
| PORTS | portlist | | |
|
| | |||
Adds entries to or edits entries in the IP Security table. The Ports parameter, applicable only to the MSS4, restricts connections to the given IP address from certain ports, and connections from this address to the specified ports.
