Command Reference | LAT |
ParametersDelay
Schedules a reboot after a specified number of minutes.
num
Enter the number of minutes, from 0 (immediate) to 120.
Factory
Reboots the MSS with its
Noboot
Cycles power on the MSS, but without booting. The MSS will remain in the Boot Configuration Program (BCP). See your installation guide for more details on BCP.
Reload
Downloads operational software upon reboot.
See Also | Appendix C, Updating Software. |
2.78 LAT
LAT serviceName :envString
Establishes a connection with a LAT service. If you do not specify a service or hostname, the MSS will attempt a connection to the preferred host or service.
Errors | Does not apply to MSSLite, |
ParametersserviceName
Enter the name of the desired LAT service, for example, “modem”.
envString
Add the desired environment key(s). See Appendix B for a complete list of strings. Options must be separated by colons.
Examples | Local> LAT modem:LD=port5 |
2.79 Logout Port
LOGOUT PORT 
PortList
Logs out the serial port, disconnecting any existing sessions. For the MSS4, you can log out multiple serial ports at once. Can also be used to log out modem card ports (Port 3 on the Via, Ports 5 and 6 for the MSS4).
ParametersPort
Logs out the current port if entered by itself or, if used with the PortList parameter, logs out the specified port.
