Lantronix MSS manual Change NetWare Routing, Change Parity, Parametersfileserver

Command Reference Change NetWare Routing

Parametersfileserver

Enter the name of the desired fileserver using no more than 8 characters.

None

Specifies that no loadhost will be used.

See Also Change Software, page 2-45.

2.39 Change NetWare Routing

 DISABLED 

CHANGE NETWARE ROUTING   ENABLED 

Allows the MSS to act as an internal router whenever there are multiple NetWare frame types in use on the LAN.

Restrictions	Requires privileged user status.
	The MSSLite, MSS4, and the MSS-VIA do not support Netware.
Defaults	Enabled
See Also	Change NetWare Encapsulation, page 2-33; Change NetWare Internal
	Network, page 2-34; Show NetWare, page 2-64.

2.40 Change Parity

			
			EVEN 
			
			MARK 
CHANGE	PORT PortList	PARITY 	NONE 
			
			ODD 
			
			SPACE 

Sets the parity for the specified serial port.

Restrictions	Requires privileged user status.
Errors	Parity must be None for the MSS100 and MSS-VIA to use 8-bit characters.
	Autobaud will not work unless the port is using 8 bit characters with No parity
	or 7 bit characters with Even parity.

2-35