Programming
Programmable settings
You can customise the unit by programming the following features using the handset. To access the features, there are 2 methods.
nScrolling through the display menus
1
(middle soft key)
2Press MCN, MDN, MEN, or MFN to select the desired main menu. a 
3Press MCN or MDN to select the desired item from the next 
4Press MCN or MDN to select the desired setting. a 
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
N.
nUsing the direct command code
1 
(middle soft key) a Enter the desired code.
Example: Press 
(middle soft key) #101.
2Select the desired setting. a 
R This step may vary depending on the feature being programmed.
R To exit the operation, press M
N.
Note:
RIn the following table, < > indicates the default settings.
RIn the following table, 
indicates the reference page number.
RDisplay menu order and
Display the menu tree and direct command code table
Main menu: 
“Caller List”
Operation | Code |
|
Viewing the caller list. | #213 | 35 |
Main menu: 
“Answer System”
Settings | Code |
| ||
Message List | – | – | #329 | 39 |
Play New Msg. | – | – | #323 | 38 |
Play All Msg. | – | – | #324 | 38 |
Erase All Msg.*1 | – | – | #325 | 40 |
Greeting | Start REC*1 | – | #302 | 38 |
| (Record greeting) |
|
|
|
| Play Greeting | – | #303 | 38 |
| Default*1 | – | #304 | 38 |
| (Reset to |
|
|
|
| greeting) |
|
|
|
24 |
|
|
|
|
