Making/Answering Calls
To turn key lock on, press 
for about 3 seconds.
R
is displayed.
RTo turn key lock off, press 
for about 3 seconds.
Note:
RCalls to emergency numbers cannot be made until key lock is turned off.
Power back-up operation
When a power failure occurs, the charged handset temporarily supplies power to the base unit (power
Important:
RIf a handset is not placed on the base unit when a power failure occurs, “Base no power Press e” or “Press e” is
displayed. After pressing M
N on the handset, place it on the base unit to start power
RPower
handset is 
/
.
RDo not lift the power supplying handset from the base unit during power
RDo not touch the handset’s charge contacts during power
RIf the battery level is low, the unit will not work sufficiently during power
RCalls cannot be made during a power failure until key lock is turned off (page 18).
RIf “Please wait for 1 minute.” is displayed, please do not operate the unit until the message disappears.
Panasonic
When the batteries are fully charged, operating time of the handset in power
–Continuous use of the handset in power
–Continuous use of the handset other than a handset in power
–Not in use in power
Note:
RActual battery performance depends on usage and ambient environment.
Making calls during a power failure
nWhen only 1 handset is registered:
1 Lift the handset and dial the phone number.
2Within 1 minute, place the handset on the base unit.
R Wait until speakerphone is turned
on automatically and the call is made.
3When the other party answers the call, keep the handset on the base unit and talk using the speakerphone.
4When you finish talking, press
M
N.
Note:
RIn step 2, if you do not place the handset on the base unit within 1 minute, the power
M
N on the handset and dial the phone number. Then try again from step 2.
nWhen 2 or more handsets are registered: You should leave one handset on the base unit for supplying power, and use another handset for making calls. For the operation, please see “Making calls”, page 17.
19
