Storing an area code to be deleted automatically

Programming

Important:

RWhen the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list

(page 35) with after the call is disconnected.

Storing unwanted callers

You can store up to 30 phone numbers in the call barred list.

Important:

RYou must store the phone number with an area code in the call barred list.

nFrom the caller list: 1 MFN ()

2MbN: Select the entry to be barred. a

3MbN: “Caller Barred” a

4 MbN: “Yes” a a MN

nBy entering phone numbers:

1 (middle soft key) #217 a

2Enter the phone number (24 digits

max.). a

R To erase a digit, press .

3MN

Viewing/editing/erasing bar call numbers

1 (middle soft key) #217

2MbN: Select the desired entry.

R To exit, press MN.

3To edit a number:

a Edit the phone number. a

a MN

To erase a number:

a MbN: “Yes” a a MN

Note:

RWhen editing, press the desired dial key to

add, to erase.

Storing an area code to be deleted automatically

In some situations, phone numbers stored automatically in the caller list (page 35) will include area codes. If you do not want to dial the area code when making calls from the caller list, you can store the area code which you want the unit to delete automatically. Example: You have stored the area code “123”. If you make a call from the caller list to the phone number “123-456-7890”, the unit dials “456-7890”.

1 (middle soft key) #255

2Enter an area code (5 digits max.). a

a MN

Setting call restriction

You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code.

1 (middle soft key) #256