Caller ID Service
Using Caller ID service
Important:
RThis unit is Caller ID compatible. To use Caller ID features (such as displaying caller phone numbers), you must subscribe to a Caller ID service. Contact your service provider/telephone company for details.
Caller ID features
When an outside call is being received, the caller’s phone number is displayed.
Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest.
RIf the unit cannot receive caller information, the following is displayed:
–“Out of Area”: The caller dials from an area which does not provide a Caller ID service.
–“Private Caller”: The caller requests not to send caller information.
RIf the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as a missed call and 
is displayed. This lets you know if you should view the caller list to see who called while you were away.
Even if only one missed call in the caller list is viewed (page 35), 
disappears from the display. When you receive another new call,
is displayed again.
Note:
REven when there are unviewed missed calls, 
disappears from the standby display if the following operation is performed by one of the registered handsets:
–Being replaced on the base unit or charger.
–Pressing M
N.
Phonebook name display
When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list.
Call waiting and Caller ID compatible
If you subscribe to Caller ID service, your handset displays the 2nd caller’s information while talking. After you hear a call waiting tone, the caller’s phone number will be displayed.
You can answer the 2nd call, keeping the 1st call on hold. Follow your service provider/ telephone company instructions using MR/ECON. (Recall/flash function)
RIf the phone number is stored in the phonebook with its name, the caller’s name will also be displayed.
RPlease contact your service provider/ telephone company for details and availability in your area.
For Caller ID Type II users
When you receive a 2nd call during a conversation, you will hear a signal tone following the call waiting tone and the conversation will be interrupted or muted for a short period of time. This is not a fault of the product as these events are normal.
RThe tones are generated by your service provider/telephone company.
Category ringer tone
This feature can help you identify who is calling by using different ringer tones for different categories of callers. When adding an entry to the phonebook, you can assign it to the desired category (page 21). When a call is received from a caller assigned to a category, the ringer you selected for that category rings after caller information is displayed.
If you select “Default Ringer”, the unit uses the ringer tone you selected on page 26
34
