Cisco Systems 5.2.x manual Enable Syslog and NTP, Choose Advanced Tasks System Tasks, 21-4

Chapter 21 Proof of Play

Procedures

Enable Syslog and NTP

Procedure

Step 1 Do one of the following.

•Would you like to enable these services from Digital Signs?

Use elements in Digital Signs to enable these services.

a.Choose Advanced Tasks > System Tasks.

b.Create a new system task.

c.Enter a meaningful name in the Name field, such as Enable PoP access on DMPs.

d.Choose Set from the Request Type list, and then enter this string:

init.syslog=on&init.syslog_collector=<DMM_routable_IP>&mib.save=1

&mng.reboot=1

•Would you like to enable these services from

DMPDM?

e.Click Submit.

f.Click OK.

g.Deploy to all DMPs that should support proof of play.

Use elements in DMPDM to enable these services

a.Click Browser in the Settings list.

b.Enter the routable IP address of your DMM appliance in the Syslog Collector IP Address field.

c.Click Apply.

d.Click NTP in the Settings list, and then choose On from the Enable NTP Service list.

e.Enter pool.ntp.org in the Hostname 1 field, if you have not already done so.

f.Choose your locale from the Time Zone list, and then click Apply.

g.Save Configuration

h.Restart.

Step 2 Stop. You have completed this procedure.

	User Guide for Cisco Digital Media Manager 5.2.x
21-4	OL-15762-03