Cisco Systems 5.2.x Activate Services, Cisco Unified Communications Manager, Cisco Cast, 15-3

Chapter 15 DMP Remote Control and Its Emulation

Procedures

Procedures

In Cisco Unified Communications Manager

•Activate Services, page 15-3

•Start Services, page 15-4

•Configure URL Parameters, page 15-4

•Enable IP Phone Autoregistration, page 15-5

•Define IP Phone Service Attributes, page 15-5

•Expose the Service to IP Phones, page 15-6

In Cisco Cast

•Configure Emulator Settings in Cast, page 15-7

On Phones

•Configure an IP Phone to Emulate the Remote Control, page 15-8

•Start the Emulator on an IP Phone, page 15-9

•Start the Emulator on a Mobile Phone, page 15-10

•Use the Emulator on an IP Phone or a Mobile Phone, page 15-10

Activate Services

Procedure

Step 1 Log in to Cisco Unified Communications Manager Administration.

Step 2 Choose Cisco Unified Serviceability from the Navigation list, and then click Go.

Step 3 Choose Tools > Service Activation.

Step 4 Examine the Server list.

Step 5 Choose from it a server that should support remote control emulation.

Step 6 Click Go.

Step 7 Check the Check All Services check box.

Step 8 Click Save, and then click OK.

Step 9 Stop. You have completed this procedure.

What to Do Next

•Proceed to the “Start Services” section on page 15-4.

	User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03		15-3