19-18
UserGuide for Cisc o Digital Media Manager 5.2.x
OL-15762-03
Chapter19 Content Distribu tion and Delivery
Procedures
Step 5 Compare the total free capacity to the expected size of your deployment package.
•When the total free capacity is sufficient, provision the assets in a deployment package, as planned.
•When the total free capacity is not sufficient, do one of the following.
–
Reduce the size of the deployment package.
–
Delete unused or unimportant assets from the DMP.
–
Attach one external USB drive to the DMP if you have not attached one already.
–
Replace the external USB drive with one that has greater capacity.
Step 6 Stop. You have completed this procedure.
Create a Deployment Package
Before You Begin
•Configure download threshold preferences for DMS-CD.
•Check the free disk space on your DMPs for storing provisioned assets.
Procedure
Step 1 Choose Digital Media Players > Advanced Tasks.
Step 2 Choose Deployment Package from the Application Types list.
Step 3 Click Add New Application.
Step 4 Enter a name and description for this deployment package.
Step 5 Choose the mount point for this deployment. You can choose only one:
•Flash Storage (also known as usb_1) is the SD memory card installed inside a DMP.
•USB (also known as usb_2) is an external USB hard drive or flash memory drive that is attached to
a DMP.
Tip To learn which external USB drives we support and have tested, see Cisco DMS compatibility information
on Cisco.com. http://www.cisco.com/en/US/products/ps6681/products_device_support_tables_list.html.
Step 6 Does this job consist of assets for an emergency notification?
•If so, check the Emergency/Alarm check box.
•If not, uncheck it.
Step 7 Populate and save the deployment package.
Step 8 Click the name of a category in the Applications list.
Step 9 Choose at least one option from the Available Applications list, and then click Select Applications.
Step 10 Click Submit.
Step 11 Use the Play in Future feature to schedule deployment of this package to your DMPs that should receive
it, and then wait for the file transfer tofinish.
Bandwidth capacity in your WAN determines how long you must wait. After the deployment is finished,
Cisco Digital Signs autogenerates the (Go To) URL action for this deployment package.