Cisco Systems 5.2.x manual Define the Ldap Synchronization Schedule

Chapter 6 Authentication and Federated Identity

Procedures

Step 4 Validate the DMM group name.

•Group names in DMM can include alphanumeric characters (0–9; a–z; A-Z), hyphens (-), underscores (_), and periods (.).

•Spaces are forbidden.

•Other forbidden characters include:

~‘!@#$%^&*()+={[}]\:;”"’'<>?/

Step 5 Click Update.

Note Please wait. Your request might take as long as 1 minute to process.

The authentication settings that you changed are now in effect.

Step 6 Stop. You have completed this procedure.

What to Do Next

•OPTIONAL — Would you like to associate a set of imported users with a new group?

Proceed to the “Derive LDAP Group Membership Dynamically from a Query” section on page 6-28.

•OPTIONAL — Would you like to configure the schedule for synchronization?

Proceed to the “Define the LDAP Synchronization Schedule” section on page 6-25.

Related Topics

•Define LDAP Filters, page 6-23

•Derive LDAP Group Membership Dynamically from a Query, page 6-28

•Elements to Use LDAP Bookmarks for Synchronization, page 6-34

Define the LDAP Synchronization Schedule

Before You Begin

•Choose LDAP or SSO as your authentication method.

•Define LDAP filters.

•Define LDAP bookmarks.

Procedure

Step 1 Choose Administration > Security > Synchronize Users > Scheduling,

Step 2 Choose between manual synchronization and automatic synchronization.

Note	You will not see any of the elements that Table 6-3 on page 6-34describes until after you define at least one
	filter on the Define Filter property sheet.

	User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03		6-25