Cisco Systems 5.2.x Enable IP Phone Autoregistration, Define IP Phone Service Attributes, 15-5

Chapter 15 DMP Remote Control and Its Emulation

Procedures

What to Do Next

•Proceed to the “Enable IP Phone Autoregistration” section on page 15-5.

Related Topics

•Start Services, page 15-4

Enable IP Phone Autoregistration

Before You Begin

•Configure URL parameters.

Procedure

Step 1 Choose System > Cisco Unified CM, and then click Find.

Step 2 Click the name of the server whose managed IP phones should be autoregistered.

Step 3 Uncheck the Auto-registration disabled on this Cisco Unified Communications Manager check box.

Step 4 Edit the range of values that starts in the Starting Directory Number field and ends in the Ending Directory Number field.

Step 5 Click Save.

Step 6 Stop. You have completed this procedure.

What to Do Next

•Proceed to the “Define IP Phone Service Attributes” section on page 15-5.

Related Topics

•Configure URL Parameters, page 15-4

Define IP Phone Service Attributes

Before You Begin

•Enable IP phone autoregistration.

Procedure

Step 1 Choose Cisco Unified CM Administration from the Navigation list, and then click Go. Step 2 Choose Device > Device Settings > Phone Services.

Step 3 Click Add New.

Step 4 Enter Cast in these fields.

•Service Name

•ASCII Service Name

	User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03		15-5