Cisco Systems 5.2.x manual Settings remain in effect, This is a one-time procedure, 14-12, Off

Chapter 14 Touchscreens, Projectors, and Displays

Procedures

Activate RS-232 Syntax Support for a 42- or 47-inch Cisco LCD

Note	This procedure applies exclusively to our 42-inch and 47-inch LCD display models. You can disregard this procedure if the
	advertised diagonal measurement of your Cisco LCD display is 32, 40, 52, or 55 inches.
	Our factory-default settings for this equipment save power by turning Off most of its support for remote
	management and polling. Almost any attempt to use these features will fail while our energy-saving
	settings remain in effect.
	Would you like to manage or poll this equipment remotely from Cisco DMS? Before you can do so
	reliably, you must complete a simple procedure that turns On the support for these features.
	Later, at your discretion, you can again turn Off this support. Otherwise, when you leave it turned On,
	this is a one-time procedure.

Before You Begin

•Connect this equipment to the DMP that will drive it.

•Plug in this equipment and turn it On.

Procedure

Step 1 Choose Digital Signs > Digital Media Players > Advanced Tasks.

Step 2 Click Add New Application.

a.Name the new application.

Are you turning On or turning Off the support for centralized management?

On	Off
• Use the Name field to enter a unique name	• Use the Name field to enter a unique name
for your new application, such as	for your new application, such as
LCD_MANAGE_POLL_TURN_ON.	LCD_MANAGE_POLL_TURN_OFF.

b.Choose Set from the Request Type list.

c.Enter the necessary command in hexadecimal.

Are you turning On or turning Off the support for centralized management?

On

•Use the Request field to enter exactly this hexadecimal string:

Off

•Use the Request field to enter exactly this hexadecimal string:

rs232.tx_hex=64612030302030310D

rs232.tx_hex=64612030312030300D

d.Click Submit.

Step 3 Choose Schedules > Play Now, and then choose Advanced Tasks from the Select an Event Type list. Step 4 Choose which application to run.

	User Guide for Cisco Digital Media Manager 5.2.x
14-12	OL-15762-03