Cisco Systems 5.2.x manual Use the Left Side of the Media and Schedules Gauge, 10-6

Chapter 10 DMP Dashboard

Procedures

Tip	•	All gauges are made wide that load on the left side.
	•	All gauges are made narrow that load on the right side.

Step 3 Stop. You have completed this procedure.

Related Topics

•Understand the Media and Schedules Gauge, page 10-2

•Use the Digital Media Players Gauge, page 10-8

•Use the Cast Gauge, page 10-8

•Use the Settings Gauge, page 10-8

Use the Left Side of the Media and Schedules Gauge

Before You Begin

•You must be logged in an administrator or as a user who has at least read-only permissions for the schedule.

Procedure

Step 1 Examine the gauge.

Step 2 Do any of the following.

•Click Now to center the timeline on the current hour.

•Move the slider left or right to adjust magnification of the schedule timeline:

–The far left position “zooms out” to show schedule magnification in 6-hour increments.

–The far right position “zooms in” to show schedule magnification in 5-minute increments.

•When your browser window is small enough that it shows a horizontal scrollbar above the timeline, use this scrollbar to scroll the timeline left or right, where left is earlier in the day and right is later in the day.

Step 3 Stop. You have completed this procedure.

Related Topics

•Understand the Left Side of the Media and Schedules Gauge, page 10-3

•Use the Digital Media Players Gauge, page 10-8

•Use the Cast Gauge, page 10-8

•Use the Settings Gauge, page 10-8

	User Guide for Cisco Digital Media Manager 5.2.x
10-6	OL-15762-03