Getting Started
Using the smart function key (Top Key)
When the smart function indicator flashes rapidly/slowly, press MSmart functionN.
RThe above features can be activated depending the situation.
RIf you answer a call using the smart function key, the speakerphone is activated.
REven if the handset is placed on the base unit or charger, the feature can be activated. You can talk or listen to new messages without lifting up the handset. If you want to perform further operations, lift up the handset.
RWhen the unit has new messages and missed calls, the unit can be operated to play the new messages first and then show the missed calls.
Note:
RWhile key lock is on (page 18), incoming calls can be answered, but the following features are disabled even when the smart function indicator flashes slowly.
–Listen to new messages. (page 39)
–View the caller list when there are missed calls. (page 35)
Setting the smart function key (Top Key Setup)
The Top key setup for the following features must be “On”.
–“New Message” (Default: On)
–“Missed Call” (Default: Off)
The settings can be set for each handset.
1
(middle soft key) #278
2MbN: Select the desired setting and press
.
R “
” is displayed next to the selected features.
R To cancel a selected feature, press
again. “
” disappears.
3
a M
N
Note:
RIf the smart function indicator flashes when the handset is not placed on the base unit
or charger, battery consumption is faster than usual.
One touch eco mode
The MR/ECON button on the handset enables you to activate the eco function with one touch. By activating eco mode, your unit can reduce the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by just pressing MR/ECON. The default setting is “Normal”.
–When the one touch eco mode is on: “Low”
is temporarily displayed and 
is shown on the handset display instead of 
.
–When the one touch eco mode is off: “Normal” is temporarily displayed and 
goes off from the handset display.
Note:
RWhen there is another cordless phone nearby and it is in use, the base unit transmission power may not be reduced.
RActivating one touch eco mode reduces the range of the base unit in standby mode.
RIf you set the repeater mode to “On” (page 33):
–One touch eco mode is cancelled.
–“Eco Setup” is not shown in the display menu (page 27).
Display mode
You can select to display either a single item or multiple items on one screen at a time for the following features:
–handset main menu icons in function menu
–menu list, recorded message list, phonebook list, caller list, and redial list
Select the desired setting:
–“Multi Items”: Multiple entries/all menu icons are shown on one screen at a time.
–“Single Item”: An entry/a menu icon is
shown on one screen in large characters at a time.
The default setting is “Multi Items”.
15
