I-Data ReRouter instruction manual ROUT0611I Trace enabled, ROUT0612W Swiddef file error

Page 66

Problem Determination ida ReRouter

ROUT0611I:

Trace enabled [...]

Description:

Program trace is enabled.

Action:

 

Note:

Trace information is written to the <LUALIAS>.trc

 

file. (see section 9.2: "Trace" for further information).

ROUT0612W: SWIDDEF file error [...]

Description:

The swiddef is either invalid or non-existing.

Action:

Re-install or update the ida ReRouter.

Note:

If problem persists then contact your point of purchase.

-

ROUT0613I:

Printer is not ready (IRQ on remote printer)

Description:

An IRQ message has been discovered in the

Action:

remote printer.

Check the remote printer to establish the IRQ

Note:

situation (paper jam, paper out, off-line?).

-

ROUT0614I:

Printer is ready (IRQ solved)

Description:

Information only.

Action:

-

Note:

-

ROUT0615E:

TCP/IP printer protocol error

Description:

A protocol error has occurred between the

Action:

ida ReRouter and the remote device.

Check the remote device and retry.

Note:

-

ROUT0616I:

Connection established to [...] port [...]

Description:

A connection has been established to the IP

Action:

address [...], port no. [...].

-

Note:

Information only.

66

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Data Electronic Documentation Main Office Preface JanuaryRelated Manuals Token Ring EthernetTable of Contents Table of Contents Ida ReRouter What is the ida ReRouter? IntroductionIda ReRouter in a Token Ring environment Product Features IdaRCtrlWith connections to PCL 4/5 printers Items Supplied with ida ReRouter Quick Guide D10276Product Requirements Host System RequirementsPersonal Computer Requirements Installation of ida ReRouter Type a setupInstallation and Setup ida ReRouter Setup of ida ReRouter Route name StatusDescription Delete NewChange VerifyView Log DeActivate RouteRefresh Product InformationDefining a new route Enter DescriptionEnter Connect Timeout Communications ManagerValidation must be made in the configuration program Additional routes Changing a routeDeleting a route Keep Alive Function Support for KeepAlive to OS/22 TCP/IP KeepAlive configuration on OS/2 Configuration of S/370 Networks Configuration Examples for MVS and VM1 PSF/MVS printer definition and startup procedure LUNAME=IDSNCEP0 2 PSF/VM PDM definition Disintv3 PSS/MVS printer definition and startup procedure PSS44 PSS/VM PDM definition Fssuser = PSS1 Userid OFF Virtual Machine Printing PSS printer profile using SNA and TCP/IP attachment Host Vtam definition PSFAPP11Mode Table Local Remote Configuration of AS/400 Networks Creating Appc device descriptionPrompts Parameter and values Parentheses Creating Printer Device Description Value must be unique withinNetwork Remote Location Name RER1 Updating Appn Remote Location ListSNA connections only Remote Network Identifier DKIDTN01Remote Control Point Name Local Location Name S4450327Control Point Network Identifier Sample Controller Definition QlusWorkstation Configuration Communications Manager/2 for S/370-390 and AS/400For SNA connection Select Configure Changing configuration fileCommunications Manager Setup Configuring Data Link Control DLC profilesConfiguring SNA local node characteristics Configuring SNA connectionSet Node type For S/370 host connection For AS/400 host connection3a. Select Activate at startup Configuring SNA featuresPeer node connection normally AS/400 Connections ListLU Alias must be the same as defined SNA Features / Partner LU Select Partner LUsCreating a local LU Ida ReRouterAS/400 only Creating a transaction program definitionFor Ipds connection to PSF/370-390 and PSF/400 Additional TP Parameters SNA Features ListFor Icds connection to ida PSS Communications Manager Profile List SheetCommunications Manager Configuration Def 2 S/370 Network Configuration Worksheet First device ida 913-03 Token RingSecond device ida PS 3 AS/400 Network Configuration Worksheet First device ida 913-03 Token Ring PartAPPCDev Printer Dev Configuration List Second device ida PS Part Partner LU Profile Explanation to Configuration Worksheets AS/400 Node ID370 S/390 TP nameLocal LU name Local LU aliasLocal LU address This parameter is for S/370 S/390 only This parameter is for AS/400 onlyLaps TCP/IPRouting Testing Connection to Remote Device Ping FunctionPing Ping function succeeded Ping function failedLog Files Problem Determination Error SyntaxAction ROUT0105E Appc communication error ROUT0035E Cannot open configuration fileROUT0052E Configuration error for entry ROUT0106E Appc allocation errorROUT0603E TCP/IP socket error ROUT0111E Appc error opcode ... Primary rc Secondary rcROUT0602E Invalid connect timeout value ROUT0110E Invalid Appc opcodeProblem Determination ida ReRouter ROUT0611I Trace enabled ROUT0612W Swiddef file errorROUT0613I Printer is not ready IRQ on remote printer ROUT0801E Named Pipe handling error ROUT0700E Internal software errorROUT0800E Semaphore handling error ROUT0802E Timer handling errorROUT0803E Thread handling error TraceList of Abbreviations PPD/PPRAppendix a Keyword Definitions SyntaxRoutename Keywordipaddress Appendix BFill-InConfigurationWorksheet WORK-STATION PSF Vtam NCP IDA Fill-In Configuration Worksheet for AS/400 Communications Appendix C i-data Products Mainframe environmentMidrange environment Readers Comments
Top Page Image Contents