Hand Held Products 3220 Software Installation On-screen Configuration, Program Field Upgrade

Programming the Scanner

While you are asking HHP SET to do the “Download,” “Upload,” and “Diagnostic” with the scanner, HHP SET will ask you to use the scanner to scan the Host Link Command for initial handshaking with HHP SET and then perform your desired action.

HHP SET Host Link

Software Installation

You may download HHP SET from the IT3220 or VT3060B/3080B product pages from our web site at www.hhp.com

On-screen Configuration

Compared with the traditional configurations done via bar code menus, HHP SET provides a GUI interface that allows the user to easily configure the scanner. The Save feature allows the configuration to be saved as a file. The Convert feature consolidates all programmable parameters for a certain application and prints the configuration list.

Configuration Download and Upload

You can retrieve (Upload) the configurations from the scanner or send (Download) new configurations to the scanner. Of course, duplicating preset configurations is as easy as 1-2-3.

Program Field Upgrade

Internal program (firmware) change or modification is only one step away via the Field Upgrade feature of the utility.

Check Software Revision

You can use the Check Revision feature to check the software revision number, to verify if the communication between your scanner and host system is good, and to check the operation of the beeper and the indicator light.

3-2