Hand Held Products 3220, 3060 Symbology Programming, User Defined Code ID, Symbol ID 1 character

Programming the Scanner

Symbology Programming

♦ User Defined Code ID ♦

PROGRAM				END(Exit)
Family Code Selection	Parameter Selection		Option Code	Option Code
Symbol ID : 1 character	Code 128 (default=B)	00		Scan hex value (2 digits)
	UCC/EAN-128 (default=C)		01	Scan hex value (2 digits)
	UPC-A (default=A)	02		Scan hex value (2 digits)
	EAN/JAN/CAN-13 (default=F)		03	Scan hex value (2 digits)
	Codabar/NW-7 (default=D)	04		Scan hex value (2 digits)
	Code 39/Code 32 (default=G)		05	Scan hex value (2 digits)
	Code 93 (default=H)	06		Scan hex value (2 digits)
	Standard/Industrial 2 of 5 (default=I)		07	Scan hex value (2 digits)
	Interleaved 2 of 5 (default=J)	08		Scan hex value (2 digits)
	Matrix 2 of 5 (default=K)		09	Scan hex value (2 digits)
	China Postal Code (default=L)	10		Scan hex value (2 digits)
	German Postal Code (default=M)		11	Scan hex value (2 digits)
	IATA (default=O)	12		Scan hex value (2 digits)
	Code 11 (default=P)		13	Scan hex value (2 digits)
	MSI/Plessey (default=R)	14		Scan hex value (2 digits)
	UK/Plessey (default=S)		15	Scan hex value (2 digits)
	Telepen (default=T)	16		Scan hex value (2 digits)
Symbol ID : 2 character	UPC-E (default=E0)	00		Scan hex value
				(2 or 4 digits) [FIN]
	EAN-8 (default=FF)		01	Scan hex value
				[2 or 4 digits] [FIN]

To determine the hex value for the “Character,” refer to the HEX/ASCII Table found on page A-6.

3-11