Dell BMX01 owner manual Configuring The I/O Modules

Updating The iKVM Firmware	29
Tiering The Avocent iKVM Switch From A Digital KVM Switch	29
Tiering The Avocent iKVM Switch From An Analog KVM Switch	29
Configuring The Analog Switch	30
Resynchronizing The Server List At The Remote Client Workstation	31
Viewing And Selecting Servers	31
FlexAddress	32
FlexAddress Plus	32
3 Configuring The I/O Modules	33
Network Information	33
I/O Connectivity	33
General I/O Module Configuration Guidelines	33
Fabric A	33
Fabric B	34
Fabric C	34
Port Auto-Disablement in Quad-Port Network Daughter Card (Dell PowerEdge M710HD Only)	34
Mezzanine Cards	35
PowerEdge M610x Only	35
Full-Height Blades	35
Half-Height Blades	35
Quarter-Height Blades	37
I/O Module Port Mapping—Full-Height Blades	37
Standard LOM (Dual-Port) Mapping	37
Dual-Port Mezzanine Cards	37
Quad-Port Mezzanine Cards	42
I/O Module Port Mapping─Half-Height Blades	43
Standard LOM (Dual-Port) and Network Daughter Card (Quad-Port) Mapping	43
Dual-Port Mezzanine Cards	44
Quad-Port Mezzanine Cards	45
I/O Module Port Mapping—Quarter-Height Blades	46
Standard LOM (Dual-Port) Mapping	46
Dual-Port Mezzanine Cards	47
Quad-Port Mezzanine Cards	50
I/O Modules—Switches	51
Configuring A Switch Module Network Ethernet Port Using The Web-Based Interface	51
Mellanox M4001F/M4001Q Infiniband Switch I/O Module	51
Dell PowerConnect KR 8024-k Switch	52
Dell PowerConnect M8428-k 10 Gb Converged Network Switch	53
Mellanox M2401G DDR Infiniband Switch I/O Module	54
Mellanox M3601Q QDR Infiniband Switch I/O Module	55
Cisco Catalyst Ethernet Switch I/O Modules	56