CMC Module
Removing A CMC Module
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Disconnect the cables attached to the CMC module.
2.Push the release latch on the handle and rotate the handle away from the module front panel.
3.Slide the CMC module out of the enclosure.
4.Install the I/O connector cover.
Figure 40. Removing and Installing a CMC Module or iKVM Module (CMC Module Shown)
1.I/O connector cover
2.release latch
3.release lever
Installing A CMC Module
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Remove the I/O connector cover.
2.Open the CMC module handle.
79