Dell I1200, I2200 manual Removing the Keyboard

Page 19

Back to Contents Page

Keyboard

Dell™ Inspiron™ i1200 and i2200 Service Manual

Removing the Keyboard

Installing the Keyboard

Removing the Keyboard

CAUTION: Before working inside your Dell™ computer, read the safety instructions in your Product Information Guide.

CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.

1.Follow the instructions in "Before Working Inside Your Computer."

2.Facing the back of the computer, use a small plastic scribe to lift the two notched edges on the hinge cover.

1notched edges (2) on hinge cover

3.Open the display all the way (180 degrees) so that it lies flat against your work surface.

4.Use a small plastic scribe to lift the right edge of the hinge cover.

5.Starting from the right and working toward the left, lift the hinge cover away from the hinges and computer base.

1 right edge of hinge cover

Image 19
Contents Model PP10S June 2005 Rev. A01 Base Plastics Before Working Inside Your Computer Before You BeginRecommended Tools Turning Off Your ComputerTurn off your computer Computer OrientationScrew Identification Back to Contents Flashing the Bios From a Floppy Disk or a CD Flashing the BiosFlashing the Bios From the Hard Drive Back to Contents Remove the display assembly Remove the Mini PCI card Coin-Cell BatteryRemoving the Microprocessor Module Microprocessor ModuleReplace the microprocessor thermal-cooling assembly Installing the Microprocessor ModuleDisplay Display AssemblyPage Page Display Panel Display BezelRemoving the Display Panel Installing the Display Panel Hard Drive Installing the Hard DriveRemoving the Hard Drive Back to Contents Removing the Keyboard KeyboardInstalling the Keyboard Palm Rest Back to Contents USB Connector Pinout Assignments for I/O ConnectorsVideo Connector Removing the Speakers SpeakersInstalling the Speakers Removing the System Board System BoardPage Installing the System Board Replace the display assembly System Components Removing the Cooling Fan Microprocessor Thermal-Cooling AssemblyInstalling the Cooling Fan Removing the Microprocessor Thermal-Cooling Assembly Page Installing the Microprocessor Thermal-Cooling Assembly Model PP10S June 2005 Rev. A01 Memory Memory, Optical Drive, Modem, and Mini PCI CardRemoving the Memory Module Optical Drive Installing the Memory ModulesRemoving the Optical Drive Modem Installing the Optical DriveRemoving the Modem Page Mini PCI Card Installing the ModemRemoving the Mini PCI Card Page Installing the Mini PCI Card Page Back to Contents