Dell I1200, I2200 manual Replace the display assembly

Page 29

7.Replace the palm rest.

8.Replace the microprocessor thermal-cooling assembly.

9.Replace the cooling fan.

10.Replace the display assembly.

11.Replace the keyboard.

12.Replace the Mini PCI card, modem, and memory module that you removed from the old system board.

13.Replace the optical drive.

14.Replace the hard drive.

15.Insert the battery into the battery bay.

16.Connect the AC adapter to the computer and to an electrical outlet.

NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

NOTE: After replacing the system board, enter the computer Service Tag into the BIOS of the replacement system board.

17.Turn on the computer.

18.Insert the CD that accompanied the replacement system board into the appropriate drive, and turn on the computer. Follow the instructions on the screen.

Back to Contents Page

Image 29

Contents Model PP10S June 2005 Rev. A01 Base Plastics Recommended Tools Before You BeginTurning Off Your Computer Before Working Inside Your ComputerTurn off your computer Computer OrientationScrew Identification Back to Contents Flashing the Bios From the Hard Drive Flashing the BiosFlashing the Bios From a Floppy Disk or a CD Back to Contents Remove the display assembly Remove the Mini PCI card Coin-Cell BatteryRemoving the Microprocessor Module Microprocessor ModuleReplace the microprocessor thermal-cooling assembly Installing the Microprocessor ModuleDisplay Display AssemblyPage Page Removing the Display Panel Display BezelDisplay Panel Installing the Display Panel Removing the Hard Drive Installing the Hard DriveHard Drive Back to Contents Removing the Keyboard KeyboardInstalling the Keyboard Palm Rest Back to Contents Video Connector Pinout Assignments for I/O ConnectorsUSB Connector Removing the Speakers SpeakersInstalling the Speakers Removing the System Board System BoardPage Installing the System Board Replace the display assembly System Components Removing the Cooling Fan Microprocessor Thermal-Cooling AssemblyInstalling the Cooling Fan Removing the Microprocessor Thermal-Cooling Assembly Page Installing the Microprocessor Thermal-Cooling Assembly Model PP10S June 2005 Rev. A01 Removing the Memory Module Memory, Optical Drive, Modem, and Mini PCI CardMemory Removing the Optical Drive Installing the Memory ModulesOptical Drive Removing the Modem Installing the Optical DriveModem Page Removing the Mini PCI Card Installing the ModemMini PCI Card Page Installing the Mini PCI Card Page Back to Contents