Dell I2200, I1200 manual Base Plastics

Page 2

Back to Contents Page

Base Plastics

Dell™ Inspiron™ i1200 and i2200 Service Manual

CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide.

CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.

1.Follow the instructions in "Before Working Inside Your Computer."

2.Remove the hard drive.

3.Remove the optical drive.

4.Remove the memory module.

5.Remove the keyboard.

6.Remove the Mini PCI card.

7.Remove the modem.

8.Remove the display assembly.

9.Remove the palm rest.

10.Remove the microprocessor thermal-cooling assembly.

11.Remove the microprocessor.

12.Remove the speakers.

13.Remove the system board.

Back to Contents Page

Image 2

Contents Model PP10S June 2005 Rev. A01 Base Plastics Turning Off Your Computer Before You BeginRecommended Tools Before Working Inside Your ComputerComputer Orientation Turn off your computerScrew Identification Back to Contents Flashing the Bios From the Hard Drive Flashing the BiosFlashing the Bios From a Floppy Disk or a CD Back to Contents Coin-Cell Battery Remove the display assembly Remove the Mini PCI cardMicroprocessor Module Removing the Microprocessor ModuleInstalling the Microprocessor Module Replace the microprocessor thermal-cooling assemblyDisplay Assembly DisplayPage Page Removing the Display Panel Display BezelDisplay Panel Installing the Display Panel Removing the Hard Drive Installing the Hard DriveHard Drive Back to Contents Keyboard Removing the KeyboardInstalling the Keyboard Palm Rest Back to Contents Video Connector Pinout Assignments for I/O ConnectorsUSB Connector Speakers Removing the SpeakersInstalling the Speakers System Board Removing the System BoardPage Installing the System Board Replace the display assembly System Components Microprocessor Thermal-Cooling Assembly Removing the Cooling FanInstalling the Cooling Fan Removing the Microprocessor Thermal-Cooling Assembly Page Installing the Microprocessor Thermal-Cooling Assembly Model PP10S June 2005 Rev. A01 Removing the Memory Module Memory, Optical Drive, Modem, and Mini PCI CardMemory Removing the Optical Drive Installing the Memory ModulesOptical Drive Removing the Modem Installing the Optical DriveModem Page Removing the Mini PCI Card Installing the ModemMini PCI Card Page Installing the Mini PCI Card Page Back to Contents