Dell I2200, I1200 manual

Page 44

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

1.Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card into the connector until it clicks.

1Mini PCI card connector

2Mini PCI card

2.Connect the antenna cable to the Mini PCI card.

NOTE: To prevent damage to the antenna cable, ensure that the card is not on top of or under the cable.

3.Align the EMI shield retention tabs with the retention-tab slots on the computer base and rotate the front until it lies flat.

4.Replace the four M2.5 x 5-mm screws that secure it to the system board.

1M2.5 x 5-mm screws (4)

2shield retention tabs (3)

3shield-retention tab slots

5.Replace the keyboard.

Image 44

Contents Model PP10S June 2005 Rev. A01 Base Plastics Before You Begin Recommended ToolsTurning Off Your Computer Before Working Inside Your ComputerComputer Orientation Turn off your computerScrew Identification Back to Contents Flashing the Bios From the Hard Drive Flashing the BiosFlashing the Bios From a Floppy Disk or a CD Back to Contents Coin-Cell Battery Remove the display assembly Remove the Mini PCI cardMicroprocessor Module Removing the Microprocessor ModuleInstalling the Microprocessor Module Replace the microprocessor thermal-cooling assemblyDisplay Assembly DisplayPage Page Removing the Display Panel Display BezelDisplay Panel Installing the Display Panel Removing the Hard Drive Installing the Hard DriveHard Drive Back to Contents Keyboard Removing the KeyboardInstalling the Keyboard Palm Rest Back to Contents Video Connector Pinout Assignments for I/O ConnectorsUSB Connector Speakers Removing the SpeakersInstalling the Speakers System Board Removing the System BoardPage Installing the System Board Replace the display assembly System Components Microprocessor Thermal-Cooling Assembly Removing the Cooling FanInstalling the Cooling Fan Removing the Microprocessor Thermal-Cooling Assembly Page Installing the Microprocessor Thermal-Cooling Assembly Model PP10S June 2005 Rev. A01 Removing the Memory Module Memory, Optical Drive, Modem, and Mini PCI CardMemory Removing the Optical Drive Installing the Memory ModulesOptical Drive Removing the Modem Installing the Optical DriveModem Page Removing the Mini PCI Card Installing the Modem Mini PCI Card Page Installing the Mini PCI Card Page Back to Contents