Dell DCTA, 9150 manual System Setup Options, 116, RAID On

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

System Setup Options

NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed.

System

System Info	Lists system information such as the computer name, the BIOS version
	number and date, system tags, and other system-specific information.
	NOTE: The system name listed in the BIOS may not appear exactly as the
	name that appears on the computer or in the computer’s documentation.
CPU Info	Identifies whether the computer’s processor supports Hyper-Threading and
	lists the processor bus speed, processor ID, clock speed, and L2 cache.
Memory Info	Indicates amount of installed memory, memory speed, channel mode (dual
	or single), and type of memory installed.
Date/Time	Displays current date and time settings.
Boot Sequence	The computer attempts to boot from the sequence of devices specified in
	this list.
	NOTE: If you insert a boot device and restart the computer, this option appears
	in the system setup menu. To boot from a USB memory device, select the USB
	device and move it so it becomes the first device in the list.
Drives
Diskette Drive	Identifies and defines the floppy drive attached to the FLOPPY connector
	on the system board as Off, USB, Internal, or Read Only.
Drives 0 through 3	Identifies the drives attached to the SATA connectors on the system board,
	and lists the capacity for hard drives.
SATA Operation	Identifies and defines the SATA controller settings for RAID. You can set
	the SATA controller to RAID Autodetect/AHCI, RAID Autodetect/ATA, or
	RAID On.
Onboard Devices
Integrated NIC	You can set the NIC to On (default), Off, or On w/ PXE. When the On
Controller	w/ PXE setting is active (available only for the future boot process), the
	computer prompts you to press <Ctrl><Alt><b>. Pressing this key
	combination causes a menu to display that allows you to select a method for
	booting from a network server. If a boot routine is not available from the
	network server, the computer attempts to boot from the next device in the
	boot sequence list.
Integrated Audio	Enables or disables the onboard audio controller.
Controller
USB Controller	Set to On (default) so that USB devices will be detected and supported in
	the operating system.

116

Appendix